F608 Flanged Ball Bearing
For an 8 mm shaft and a 22 mm housing bore, the F608 flanged ball bearing (F and MF series) is 7 mm wide. Modeled as simplified STEP files. Its flange is 25 mm across and 1.5 mm thick.

How these parts are made, and what the levels mean: read the method
- Also known as: F608 flange bearing, F608 MF bearing, F608 F bearing, F608 flanged miniature bearing
- Model id:
bearings-miniature-flanged-f608
- Standard: F and MF series · size F608
Files
| Part key | Simplified |
|---|
bearings-miniature-flanged-f608 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Bore diameter | | 8 | | 8 | nominal | L1 |
| D | Outside diameter | | 22 | | 22 | nominal | L1 |
| B | Width | | 7 | | 7 | nominal | L1 |
| r | Chamfer dimension | 0.3 | | | 0.3 | single limit (min), modeled at the limit | L1 |
| D1 | Flange diameter | | 25 | | 25 | nominal | L1 |
| C1 | Flange width | | 1.5 | | 1.5 | nominal | L1 |
Drawing

As a PDF: CC-BRG-MINI-FL-SZ-F608.pdf.
The F608 flanged ball bearing beside the F698 and the F689
The F608 is number 38 of the 39 F and MF series flanged ball bearings published here, listed from F682 to F689.
- Bore diameter (d): 8 mm on the F608 flanged ball bearing, against 8 mm on the F698 and 9 mm on the F689.
- Outside diameter (D): 22 mm on the F608 flanged ball bearing, against 19 mm on the F698 and 17 mm on the F689.
- Width (B): 7 mm on the F608 flanged ball bearing, against 6 mm on the F698 and 4 mm on the F689.
- Chamfer dimension (r): at least 0.3 mm on the F608 flanged ball bearing, against at least 0.3 mm on the F698 and at least 0.2 mm on the F689.
- Flange diameter (D1): 25 mm on the F608 flanged ball bearing, against 22 mm on the F698 and 19 mm on the F689.
- Flange width (C1): 1.5 mm on the F608 flanged ball bearing, against 1.5 mm on the F698 and 1 mm on the F689.
The F608 flanged ball bearing in its other versions
Other sizes
Conventions
- Simplified only: rings, flange, shield or seal face, no balls or cage. STEP AP214, millimetres, Z along the axis, the flange face at Z = 0.
- No markings; tolerance class, clearance and lubricant are not geometry.
- Bore d, outside diameter D and width B at the nominals of the product's own row (the shielded or sealed bearing's own width); rings concentric, faces flush.
Documents
Sources
nmb-miniature-flanged, nsk-miniature-flanged, ntn-bearingfinder-miniature-flanged. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...