For a 4 mm shaft, this 4 mm shaft collar (DIN 705, form A, set-screw hole) is 8 mm outside and 5 mm wide, held by an M2.5 set-screw hole. Modeled as simplified and threaded STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 4 mm set collar, 4 mm adjusting ring, 4 mm stop collar, 4 mm Stellring
- Model id:
din705-a-d4
- Standard: DIN 705:2019 · size 4 mm
Files
| Part key | Simplified | Threaded |
|---|
din705-a-d4 | STEP | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d1 | Bore diameter | | 4 | | 4 | nominal | L1 |
| d2 | Outside diameter | | 8 | | 8 | nominal | L1 |
| b | Width | | 5 | | 5 | nominal | L1 |
| d3 | Set-screw thread | | 2.5 | | 2.5 | nominal | L1 |
| l_s | Set-screw length | | 3 | | 3 | nominal | L1 |
Drawing

As a PDF: CC-DIN705-SZ-4.pdf.
The 4 mm is number 2, counting from the smallest, of the 11 DIN 705 shaft collars published here, from 3 mm to 20 mm.
- Bore diameter (d1): 4 mm on the 4 mm form A shaft collar, against 3 mm on the 3 mm and 5 mm on the 5 mm.
- Outside diameter (d2): 8 mm on the 4 mm form A shaft collar, against 7 mm on the 3 mm and 10 mm on the 5 mm.
- Width (b): 5 mm on the 4 mm form A shaft collar, against 5 mm on the 3 mm and 6 mm on the 5 mm.
- Set-screw thread (d3): 2.5 mm on the 4 mm form A shaft collar, against 2 mm on the 3 mm and 3 mm on the 5 mm.
- Set-screw length (l_s): 3 mm on the 4 mm form A shaft collar, against 3 mm on the 3 mm and 4 mm on the 5 mm.
Other sizes
- One size smaller: 3 mm Shaft Collar, DIN 705, Form A (Set-screw Hole), 3 mm bore, 7 mm OD, 5 mm wide, M2 set screw.
- One size larger: 5 mm Shaft Collar, DIN 705, Form A (Set-screw Hole), 5 mm bore, 10 mm OD, 6 mm wide, M3 set screw.
Conventions
- Form A: simplified and threaded; form B has no thread, simplified only. STEP AP214, millimetres, Z along the bore axis, the plain face at Z = 0 and the chamfered face at Z = b, the hole on +X at Z = b/2.
- d1 at the midpoint of its H8 band and d2 at the midpoint of its h13 band, from the ISO 286-2 grade widths; b, d3 and d4 at their nominals.
- Form A, threaded level: ISO 68-1 basic internal thread in the hole, right hand, coarse pitch, over the full wall.
Documents
Sources
dinmark-din705, fasten-it-din705, maedler-din705. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...