An M6 set-screw hole holds this 16 mm shaft collar (DIN 705, form A, set-screw hole) on a 16 mm shaft; 28 mm outside, 12 mm wide. It comes in simplified and threaded STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 16 mm set collar, 16 mm adjusting ring, 16 mm stop collar, 16 mm Stellring
- Model id:
din705-a-d16
- Standard: DIN 705:2019 · size 16 mm
Files
| Part key | Simplified | Threaded |
|---|
din705-a-d16 | STEP | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d1 | Bore diameter | | 16 | | 16 | nominal | L1 |
| d2 | Outside diameter | | 28 | | 28 | nominal | L1 |
| b | Width | | 12 | | 12 | nominal | L1 |
| d3 | Set-screw thread | | 6 | | 6 | nominal | L1 |
| l_s | Set-screw length | | 8 | | 8 | nominal | L1 |
Drawing

As a PDF: CC-DIN705-SZ-16.pdf.
The 16 mm is number 9, counting from the smallest, of the 11 DIN 705 shaft collars published here, from 3 mm to 20 mm.
- Bore diameter (d1): 16 mm on the 16 mm form A shaft collar, against 14 mm on the 14 mm and 18 mm on the 18 mm.
- Outside diameter (d2): 28 mm on the 16 mm form A shaft collar, against 25 mm on the 14 mm and 32 mm on the 18 mm.
- Width (b): 12 mm on the 16 mm form A shaft collar, against 12 mm on the 14 mm and 14 mm on the 18 mm.
- Set-screw thread (d3): 6 mm on the 16 mm form A shaft collar, the same on the 14 mm and the 18 mm.
- Set-screw length (l_s): 8 mm on the 16 mm form A shaft collar, the same on the 14 mm and the 18 mm.
Other sizes
- One size smaller: 14 mm Shaft Collar, DIN 705, Form A (Set-screw Hole), 14 mm bore, 25 mm OD, 12 mm wide, M6 set screw.
- One size larger: 18 mm Shaft Collar, DIN 705, Form A (Set-screw Hole), 18 mm bore, 32 mm OD, 14 mm wide, M6 set screw.
Conventions
- Form A: simplified and threaded; form B has no thread, simplified only. STEP AP214, millimetres, Z along the bore axis, the plain face at Z = 0 and the chamfered face at Z = b, the hole on +X at Z = b/2.
- d1 at the midpoint of its H8 band and d2 at the midpoint of its h13 band, from the ISO 286-2 grade widths; b, d3 and d4 at their nominals.
- Form A, threaded level: ISO 68-1 basic internal thread in the hole, right hand, coarse pitch, over the full wall.
Documents
Sources
dinmark-din705, fasten-it-din705, maedler-din705. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...