M6 Chamfered Flat Washer, ISO 7090

STL Supports CommunityCAD0 downloads
M6 Chamfered Flat Washer, ISO 7090
1 / 4

M6 Chamfered Flat Washer, ISO 7090

The M6 chamfered flat washer (ISO 7090) is 1.6 mm thick, with a 6.4 mm hole and an outside diameter of 12 mm. It sits under M6 screw heads and nuts; here as simplified STEP files.

M6 chamfered flat washer, ISO 7090

How these parts are made, and what the levels mean: read the method

  • Also known as: M6 chamfered plain washer, M6 flat washer
  • Model id: iso7090-m6
  • Standard: ISO 7090:2000 · size M6

Files

Part keySimplified
iso7090-m6STEP

Dimensions

Dimension symbols for M6 chamfered flat washers (ISO 7090)

SymbolNameminnommaxModeledRuleLevel
d1Inside diameter6.46.46.626.4nominalL1
d2Outside diameter11.57121212nominalL1
hThickness1.41.61.81.6nominalL1
ch_angleChamfer angle304537.5midpoint of min–maxL0 (min, max: one source)
ch_hChamfer height0.250.50.375midpoint of min–maxL0 (min, max: one source)

Drawing

Drawing of the M6 chamfered flat washer with its values (ISO 7090)

As a PDF: CC-ISO7090-SZ-M6.pdf.

Goes with the M6 chamfered flat washer

The M6 chamfered flat washer beside the M5 and the M8

The M6 is number 2, counting from the smallest, of the 3 ISO 7090 chamfered flat washers published here, from M5 to M8.

  • Inside diameter (d1): 6.4 mm on the M6 chamfered flat washer, against 5.3 mm on the M5 and 8.4 mm on the M8.
  • Outside diameter (d2): 12 mm on the M6 chamfered flat washer, against 10 mm on the M5 and 16 mm on the M8.
  • Thickness (h): 1.6 mm on the M6 chamfered flat washer, against 1 mm on the M5 and 1.6 mm on the M8.
  • Chamfer angle (ch_angle): 30 to 45° on the M6 chamfered flat washer, the same on the M5 and the M8.
  • Chamfer height (ch_h): 0.25 to 0.5 mm on the M6 chamfered flat washer, the same on the M5 and the M8.

Other sizes

Conventions

  • Simplified only: a washer has no thread, so there is one detail level. STEP AP214, millimetres, Z up, the plain face at Z = 0.
  • Hole d1 and outside d2 at their nominals, which the standard puts at d1 min and d2 max; thickness h at its nominal.

Documents

Sources

fasten-it-iso7090, fasten-it-iso7090-drawing, globalfastener-iso7090, westfield-iso7090. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO7090-DS-M6.pdf

* CC-1S07090-DS-Mé revA '?) CommunityCAD Size datasheet - M6 ISO 7090 M6 chamfered plain washer Size datasheet: this size's values with their levels, conventions and sources. For M6 bolts and screws Part key iso7090-m6 =|?) Files 1 STEP AP214 (simplified) M6, front view, 3:1 M6, view from above,…

View full datasheet →

docs/CC-ISO7090-SZ-M6.pdf

ISO 7090 plain washer, chamfered, normal series, grade A, M6 Size drawing - M6 values on the views - enlarged 5:1 Sym. | Dimensi M6 di Hole diameter (nom = min) 6.4 a = 37.5°* d2 Outside diameter (nom = max) ee 30° 45° 11.57-12 1.6 T Thickness d2 =12 1.4-1.8 11.57-12 37.5% Chamfer angle from the…

View full datasheet →