M6 Chamfered Flat Washer, ISO 7090 size drawing (PDF)

Datasheet — M6 Chamfered Flat Washer, ISO 7090 by Milo

Open the PDF
M6 Chamfered Flat Washer, ISO 7090Get the CAD modelM6 Chamfered Flat Washer, ISO 7090CC-ISO7090-SZ-M6.pdf

Text of this datasheet

ISO 7090 plain washer, chamfered, normal series, grade A, M6

Size drawing - M6 values on the views - enlarged 5:1

Sym. | Dimensi M6

di Hole diameter (nom = min) 6.4

a = 37.5°* d2 Outside diameter (nom = max) ee 30° 45° 11.57-12

1.6 T Thickness d2 =12 1.4-1.8 11.57-12

37.5%

Chamfer angle from the axis, ° 30-45

0.375*

c/h — Chamfer height / thickness 0.25-0.5

Source levels Main value = the modeled value (nominal, else the middle of min-max).

Grey under a value = its min-max, where the source gives both. < / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L13 - LO 2. d2 =12 Notes MS712 d1 nom = d1 min and d2 nom = d2 max (the standard's own convention); h nom lies in its band. Edges are sharp, walls square to the faces: house conventions, sheet DO2. a and c/h: entered by the owner from the standard's figure (#472), one source (LO); modeled at the middle of their bands, c applied to the modeled h, +Z face only.

View from above

TITLE

'? CommunityCAD Size drawing, M6

STANDARDS FOLLOWED FAMILY / DETAIL

ISO 7090:2000 Chamfered plain washer - M6 SHEET REV SCALE PROJECTION UNITS CC-1S07090-SZ-Mé A 5:11 € Dimensions in mm

SPEC VERSION LICENSE PAGE cfd05b053c736a4F15ba3030aa41febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.