M8 Flat Washer, ISO 7089

STL Supports CommunityCAD1 downloads
M8 Flat Washer, ISO 7089
1 / 4

M8 Flat Washer, ISO 7089

Made for M8 screws, this flat washer (ISO 7089) has an 8.4 mm hole and is 16 mm across, 1.6 mm thick. Download it as simplified STEP files.

M8 flat washer, ISO 7089

How these parts are made, and what the levels mean: read the method

  • Also known as: M8 plain washer, M8 standard washer
  • Model id: iso7089-m8
  • Standard: ISO 7089:2000 · size M8

Files

Part keySimplified
iso7089-m8STEP

Dimensions

Dimension symbols for M8 flat washers (ISO 7089)

SymbolNameminnommaxModeledRuleLevel
d1Inside diameter8.48.48.628.4nominalL1
d2Outside diameter15.57161616nominalL1
hThickness1.41.61.81.6nominalL1

Drawing

Drawing of the M8 flat washer with its values (ISO 7089)

As a PDF: CC-ISO7089-SZ-M8.pdf.

Goes with the M8 flat washer

Approximate mass

Approximate mass of 1000 washers, from fasten.it's DIN EN ISO 7089 table (fasten-it-iso7089), column “weight in Kg x 1000 pcs (ρ=7,85 kg/dm3)”.

  • mass per 1000: 1.83 kg

The M8 flat washer beside the M6

The M8 is the largest of the 7 ISO 7089 flat washers published here, from M2 to M8.

  • Inside diameter (d1): 8.4 mm on the M8 flat washer, against 6.4 mm on the M6.
  • Outside diameter (d2): 16 mm on the M8 flat washer, against 12 mm on the M6.
  • Thickness (h): 1.6 mm on the M8 flat washer, the same on the M6.

Other sizes

Conventions

  • Simplified only: a washer has no thread, so there is one detail level. STEP AP214, millimetres, Z up, one face at Z = 0.
  • Hole d1 and outside d2 at their nominals, which the standard puts at d1 min and d2 max; thickness h at its nominal.

Documents

Sources

amesweb-iso7089, fasten-it-iso7089, westfield-iso7089. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO7089-DS-M8.pdf

* CC-1S07089-DS-M8 rev A '?) CommunityCAD Size datasheet - M8 ISO 7089 M8 plain washer Size datasheet: this size's values with their levels, conventions and sources. For M8 bolts and screws Part key iso7089-m8 | Files 1 STEP AP214 (simplified) MB, front view, 2.5:1 MB, view from above, 1.5:1 Sym.…

View full datasheet →

docs/CC-ISO7089-SZ-M8.pdf

ISO 7089 plain washer, normal series, grade A, M8 Size drawing - M8 values on the views - enlarged 5:1 ' d2 =16 15.57-16.00 d2 =16 15.57-16.00 View from above Dimension 8.4 8.40-8.62 Hole diameter (nom = min) 16 15.57-16.00 Outside diameter (nom = max) 1.6 1.4-1.8 Thickness Source levels Main…

View full datasheet →