M6 Flat Washer, ISO 7089

STL Supports CommunityCAD0 downloads
M6 Flat Washer, ISO 7089
1 / 4

M6 Flat Washer, ISO 7089

The M6 flat washer (ISO 7089) is 1.6 mm thick, with a 6.4 mm hole and an outside diameter of 12 mm. It sits under M6 screw heads and nuts; here as simplified STEP files.

M6 flat washer, ISO 7089

How these parts are made, and what the levels mean: read the method

  • Also known as: M6 plain washer, M6 standard washer
  • Model id: iso7089-m6
  • Standard: ISO 7089:2000 · size M6

Files

Part keySimplified
iso7089-m6STEP

Dimensions

Dimension symbols for M6 flat washers (ISO 7089)

SymbolNameminnommaxModeledRuleLevel
d1Inside diameter6.46.46.626.4nominalL1
d2Outside diameter11.57121212nominalL1
hThickness1.41.61.81.6nominalL1

Drawing

Drawing of the M6 flat washer with its values (ISO 7089)

As a PDF: CC-ISO7089-SZ-M6.pdf.

Goes with the M6 flat washer

Approximate mass

Approximate mass of 1000 washers, from fasten.it's DIN EN ISO 7089 table (fasten-it-iso7089), column “weight in Kg x 1000 pcs (ρ=7,85 kg/dm3)”.

  • mass per 1000: 1.02 kg

The M6 flat washer beside the M5 and the M8

The M6 is number 6, counting from the smallest, of the 7 ISO 7089 flat washers published here, from M2 to M8.

  • Inside diameter (d1): 6.4 mm on the M6 flat washer, against 5.3 mm on the M5 and 8.4 mm on the M8.
  • Outside diameter (d2): 12 mm on the M6 flat washer, against 10 mm on the M5 and 16 mm on the M8.
  • Thickness (h): 1.6 mm on the M6 flat washer, against 1 mm on the M5 and 1.6 mm on the M8.

Other sizes

Conventions

  • Simplified only: a washer has no thread, so there is one detail level. STEP AP214, millimetres, Z up, one face at Z = 0.
  • Hole d1 and outside d2 at their nominals, which the standard puts at d1 min and d2 max; thickness h at its nominal.

Documents

Sources

amesweb-iso7089, fasten-it-iso7089, westfield-iso7089. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO7089-DS-M6.pdf

* CC-1S07089-DS-Mé revA '?) CommunityCAD Size datasheet - M6 ISO 7089 M6 plain washer Size datasheet: this size's values with their levels, conventions and sources. For M6 bolts and screws Part key iso7089-m6 CLc.CtCMCizd Files 1 STEP AP214 (simplified) M6, front view, 3:1 M6, view from above, 2:1…

View full datasheet →

docs/CC-ISO7089-SZ-M6.pdf

ISO 7089 plain washer, normal series, grade A, M6 Size drawing - M6 values on the views - enlarged 5:1 d2=12 11.57-12.00 d1= 6.4 6.40-6.62 d2=12 11.57-12.00 View from above Dimension 6.4 6.40-6.62 Hole diameter (nom = min) 12 11.57-12.00 Outside diameter (nom = max) 1.6 1.4-1.8 Thickness Source…

View full datasheet →