M2x4 Heat-set Insert
The M2x4 heat-set insert (Heat-set threaded insert): length 4 mm, knurl outside diameter 3.6 mm, pilot diameter 3.1 mm. Available as simplified and threaded STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: M2x4 threaded insert for printed parts, M2x4 heat-stake insert, M2x4 brass insert for plastic, M2x4 melt-in insert
- Model id:
heat-set-inserts-m2x4
- Standard: Heat-set threaded insert · size M2x4
Files
| Part key | Simplified | Threaded |
|---|
heat-set-inserts-m2x4 | STEP | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| L | Length | | 4 | | 4 | nominal | L0 (nom: one source) |
| d1 | Knurl outside diameter | | 3.6 | | 3.6 | nominal | L0 (nom: one source) |
| d2 | Pilot diameter | | 3.1 | | 3.1 | nominal | L0 (nom: one source) |
Drawing

As a PDF: CC-HSINSERT-SZ-M2x4.pdf.
What each maker states
- Recommended hole, per maker: ruthex 3.2 mm.
- Wall around the hole, per maker: ruthex 1.3 mm.
- Minimum hole depth, per maker: ruthex 5.0 mm.
- The hole depth is each maker's callout on its drawing added to that maker's L, read twice by Claude, and the two reads agree.
The M2x4 heat-set insert beside the M2x3 and the M2.5x4
The M2x4 is number 2, counting from the smallest, of the 15 Heat-set threaded insert heat-set inserts published here, from M2x3 to M8x12.7.
- Length (L): 4 mm on the M2x4 heat-set insert, against 3 mm on the M2x3 and 4 mm on the M2.5x4.
- Knurl outside diameter (d1): 3.6 mm on the M2x4 heat-set insert, against 3.6 mm on the M2x3 and 4.6 mm on the M2.5x4.
- Pilot diameter (d2): 3.1 mm on the M2x4 heat-set insert, against 3.1 mm on the M2x3 and 3.9 mm on the M2.5x4.
Other sizes
Conventions
- Simplified: plain bands and a plain bore at the nominal diameter, light for assemblies. Threaded: the illustrative knurl and the ISO 68-1 internal thread, for close-ups and renders.
- Knurl, groove, lead and pilot proportions: illustrative, not any maker's design.
- Simplified level: plain bands at d1 and a plain bore at the nominal diameter D, so it mates with simplified screws.
Documents
Sources
ruthex-inserts. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...