M3x3 Heat-set Insert

STEP · STL Supports CommunityCAD0 downloads
M3x3 Heat-set Insert
1 / 6

M3x3 Heat-set Insert

The M3x3 heat-set insert (Heat-set threaded insert): length 3 mm, knurl outside diameter 4.6 mm, pilot diameter 3.9 mm. Available as simplified and threaded STEP files.

M3x3 heat-set insert, Heat-set threaded insert

How these parts are made, and what the levels mean: read the method

  • Also known as: M3x3 threaded insert for printed parts, M3x3 heat-stake insert, M3x3 brass insert for plastic, M3x3 melt-in insert
  • Model id: heat-set-inserts-m3x3
  • Standard: Heat-set threaded insert · size M3x3

Files

Part keySimplifiedThreaded
heat-set-inserts-m3x3STEPSTEP

Dimensions

Dimension symbols for M3x3 heat-set inserts (Heat-set threaded insert)

SymbolNameminnommaxModeledRuleLevel
LLength33nominalL0 (nom: one source)
d1Knurl outside diameter4.64.6nominalL0 (nom: one source)
d2Pilot diameter3.93.9nominalL0 (nom: one source)

Drawing

Drawing of the M3x3 heat-set insert with its values (Heat-set threaded insert)

As a PDF: CC-HSINSERT-SZ-M3x3.pdf.

What each maker states

  • Recommended hole, per maker: CNC Kitchen 4.0 mm.
  • Wall around the hole, per maker: CNC Kitchen 1.6 mm.
  • Minimum hole depth, per maker: CNC Kitchen 4.0 mm.
  • The hole depth is each maker's callout on its drawing added to that maker's L, read twice by Claude, and the two reads agree.
  • CNC Kitchen's values for this size are figure reads: its table is an image, read twice by Claude, and the two reads agree.

The M3x3 heat-set insert beside the M2.5x5.7 and the M3x4

The M3x3 is number 5, counting from the smallest, of the 15 Heat-set threaded insert heat-set inserts published here, from M2x3 to M8x12.7.

  • Length (L): 3 mm on the M3x3 heat-set insert, against 5.7 mm on the M2.5x5.7 and 4 mm on the M3x4.
  • Knurl outside diameter (d1): 4.6 mm on the M3x3 heat-set insert, the same on the M2.5x5.7 and the M3x4.
  • Pilot diameter (d2): 3.9 mm on the M3x3 heat-set insert, the same on the M2.5x5.7 and the M3x4.

Other sizes

Conventions

  • Simplified: plain bands and a plain bore at the nominal diameter, light for assemblies. Threaded: the illustrative knurl and the ISO 68-1 internal thread, for close-ups and renders.
  • Knurl, groove, lead and pilot proportions: illustrative, not any maker's design.
  • Simplified level: plain bands at d1 and a plain bore at the nominal diameter D, so it mates with simplified screws.

Documents

Sources

cnckitchen-inserts, rule-heat-set-pilot. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-HSINSERT-SZ-M3x3.pdf

Heat-set threaded insert, per thread and length, M3x3 Size drawing - M3x3 values on the views - enlarged 8:1 = /_+_ Dimension Length di Knurl outside diameter d2 Pilot diameter Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max,…

View full datasheet →

docs/CC-HSINSERT-DS-M3x3.pdf

* CC-HSINSERT-DS-M3x3 rev A '?) CommunityCAD Size datasheet - M3x3 M3x3 heat-set insert Size datasheet: this size's values with their levels, conventions and sources. For M3 screws in 3D-printed and — Part key heat-set-inserts-m3x3 _ Lr Files 2 STEP AP214 (simplified, Pi threaded) M3x3, top, 4:1…

View full datasheet →