9 mm Internal Retaining Ring, DIN 472

STEP · STL Supports CommunityCAD0 downloads
9 mm Internal Retaining Ring, DIN 472
1 / 6

9 mm Internal Retaining Ring, DIN 472

For a 9 mm bore, grooved to 9.4 mm: the internal retaining ring (DIN 472), 0.8 mm thick. Download it as simplified STEP files.

9 mm internal retaining ring, DIN 472

How these parts are made, and what the levels mean: read the method

  • Also known as: 9 mm bore circlip, 9 mm internal circlip, 9 mm internal snap ring
  • Model id: din472-d9
  • Standard: DIN 472:2017 · size 9 mm

Files

Part keySimplified
din472-d9STEP

Dimensions

Dimension symbols for 9 mm internal retaining rings (DIN 472)

SymbolNameminnommaxModeledRuleLevel
sRing thickness0.80.8nominalL1
s_limRing thickness, limits0.750.80.775midpoint of min–maxL0 (max: one source)
d3Free diameter9.89.8nominalL1
d3_limFree diameter, limits9.710.169.93midpoint of min–maxL1
aLug height2.52.5single limit (max), modeled at the limitL1
bRadial width1.3 ref1.3reference valueL1
d5Plier hole diameter11single limit (min), modeled at the limitL1
d2Groove diameter9.49.4nominalL1
mGroove width0.90.9nominalL1
nGroove edge margin0.60.6single limit (min), modeled at the limitL1

Drawing

Drawing of the 9 mm internal retaining ring with its values (DIN 472)

As a PDF: CC-DIN472-SZ-9.pdf.

The 9 mm internal retaining ring beside the 8 mm and the 10 mm

The 9 mm is number 2, counting from the smallest, of the 17 DIN 472 internal retaining rings published here, from 8 mm to 25 mm.

  • Ring thickness (s): 0.8 mm on the 9 mm internal retaining ring, against 0.8 mm on the 8 mm and 1 mm on the 10 mm.
  • Ring thickness, limits (s_lim): 0.75 to 0.8 mm on the 9 mm internal retaining ring, against 0.75 to 0.8 mm on the 8 mm and 0.94 to 1 mm on the 10 mm.
  • Free diameter (d3): 9.8 mm on the 9 mm internal retaining ring, against 8.7 mm on the 8 mm and 10.8 mm on the 10 mm.
  • Free diameter, limits (d3_lim): 9.7 to 10.16 mm on the 9 mm internal retaining ring, against 8.6 to 9.06 mm on the 8 mm and 10.7 to 11.16 mm on the 10 mm.
  • Lug height (a): up to 2.5 mm on the 9 mm internal retaining ring, against up to 2.4 mm on the 8 mm and up to 3.2 mm on the 10 mm.
  • Radial width (b): 1.3 mm (reference) on the 9 mm internal retaining ring, against 1.1 mm (reference) on the 8 mm and 1.4 mm (reference) on the 10 mm.
  • Plier hole diameter (d5): at least 1 mm on the 9 mm internal retaining ring, against at least 1 mm on the 8 mm and at least 1.2 mm on the 10 mm.
  • Groove diameter (d2): 9.4 mm on the 9 mm internal retaining ring, against 8.4 mm on the 8 mm and 10.4 mm on the 10 mm.

Other sizes

Conventions

  • Simplified only: a ring has no thread, so there is one detail level. STEP AP214, millimetres, Z along the bore axis, one face at Z = 0, the opening on +X.
  • Thickness s and free outer diameter d3 at their nominals, the ring modeled free (unstressed); lug height a at its max and plier hole d5 at its min (single limits); radial width b at its approximate value.

Documents

Sources

fasten-it-din472, fasteners-eu-din472, hc-maschinentechnik-din472, seeger-din472. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-DIN472-DS-9.pdf

CC-DIN472-DS-9 revA Size datasheet - 9 '?) CommunityCAD DIN 472 9 internal retaining ring Size datasheet: this size's values with their levels, conventions and sources. For a9 mm bore Part key din472-d9 | Files 1 STEP AP214 (simplified) 9, front view, 4:1 9, view from above, 2:1 Sym. Dimensi Value…

View full datasheet →

docs/CC-DIN472-SZ-9.pdf

DIN 472 retaining ring for bores, normal type, 9 mm bore Size drawing - 9 mm bore values on the views - enlarged 10:1 Sym. Dimensi Ring thickness Free diameter Lug height (max) Radial width at the back (~) Plier hole (min) Groove diameter Groove width (H13) b = 1.3 ref Groove edge margin (min)…

View full datasheet →