22 mm Internal Retaining Ring, DIN 472
The 22 mm internal retaining ring (DIN 472) fits a 22 mm bore with a groove diameter of 23 mm, and is 1 mm thick. Here as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 22 mm bore circlip, 22 mm internal circlip, 22 mm internal snap ring
- Model id:
din472-d22
- Standard: DIN 472:2017 · size 22 mm
Files
| Part key | Simplified |
|---|
din472-d22 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| s | Ring thickness | | 1 | | 1 | nominal | L1 |
| s_lim | Ring thickness, limits | 0.94 | | 1 | 0.97 | midpoint of min–max | L0 (max: one source) |
| d3 | Free diameter | | 23.5 | | 23.5 | nominal | L1 |
| d3_lim | Free diameter, limits | 23.37 | | 23.92 | 23.645 | midpoint of min–max | L1 |
| a | Lug height | | | 4.2 | 4.2 | single limit (max), modeled at the limit | L1 |
| b | Radial width | | 2.5 ref | | 2.5 | reference value | L1 |
| d5 | Plier hole diameter | 2 | | | 2 | single limit (min), modeled at the limit | L1 |
| d2 | Groove diameter | | 23 | | 23 | nominal | L1 |
| m | Groove width | | 1.1 | | 1.1 | nominal | L1 |
| n | Groove edge margin | 1.5 | | | 1.5 | single limit (min), modeled at the limit | L1 |
Drawing

As a PDF: CC-DIN472-SZ-22.pdf.
The 22 mm internal retaining ring beside the 21 mm and the 24 mm
The 22 mm is number 15, counting from the smallest, of the 17 DIN 472 internal retaining rings published here, from 8 mm to 25 mm.
- Ring thickness (s): 1 mm on the 22 mm internal retaining ring, against 1 mm on the 21 mm and 1.2 mm on the 24 mm.
- Ring thickness, limits (s_lim): 0.94 to 1 mm on the 22 mm internal retaining ring, against 0.94 to 1 mm on the 21 mm and 1.14 to 1.2 mm on the 24 mm.
- Free diameter (d3): 23.5 mm on the 22 mm internal retaining ring, against 22.5 mm on the 21 mm and 25.9 mm on the 24 mm.
- Free diameter, limits (d3_lim): 23.37 to 23.92 mm on the 22 mm internal retaining ring, against 22.37 to 22.92 mm on the 21 mm and 25.69 to 26.32 mm on the 24 mm.
- Lug height (a): up to 4.2 mm on the 22 mm internal retaining ring, against up to 4.2 mm on the 21 mm and up to 4.4 mm on the 24 mm.
- Radial width (b): 2.5 mm (reference) on the 22 mm internal retaining ring, against 2.4 mm (reference) on the 21 mm and 2.6 mm (reference) on the 24 mm.
- Plier hole diameter (d5): at least 2 mm on the 22 mm internal retaining ring, the same on the 21 mm and the 24 mm.
- Groove diameter (d2): 23 mm on the 22 mm internal retaining ring, against 22 mm on the 21 mm and 25.2 mm on the 24 mm.
Other sizes
Conventions
- Simplified only: a ring has no thread, so there is one detail level. STEP AP214, millimetres, Z along the bore axis, one face at Z = 0, the opening on +X.
- Thickness s and free outer diameter d3 at their nominals, the ring modeled free (unstressed); lug height a at its max and plier hole d5 at its min (single limits); radial width b at its approximate value.
Documents
Sources
fasten-it-din472, fasteners-eu-din472, hc-maschinentechnik-din472, seeger-din472. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...