80x25 Cooling Fan, DC Axial

STEP · STL Supports CommunityCAD0 downloads
80x25 Cooling Fan, DC Axial
1 / 6

80x25 Cooling Fan, DC Axial

An 80 mm square cooling fan, 25.4 mm thick, with 4.5 mm mounting holes 71.5 mm apart. It comes as simplified STEP files.

80x25 cooling fan, DC axial fan

How these parts are made, and what the levels mean: read the method

  • Also known as: 80x25 computer fan, 80x25 case fan, 80x25 DC brushless fan
  • Model id: fans-dc-axial-80x25
  • Standard: DC axial fan · size 80x25

Files

Part keySimplified
fans-dc-axial-80x25STEP

Dimensions

Dimension symbols for 80x25 cooling fans (DC axial fan)

SymbolNameminnommaxModeledRuleLevel
aFrame side8080nominalL1
tFrame thickness25.425.4nominalL1
eMounting hole spacing71.571.5nominalL1
dhMounting hole diameter4.54.5nominalL1

Drawing

Drawing of the 80x25 cooling fan with its values (DC axial fan)

As a PDF: CC-DCFAN-SZ-80x25.pdf.

From the maker's data sheet

As written on the Mechatronics data sheet for this frame (mechatronics-dc-axial), one of the sheets this size's dimensions come from: the series, its models and features.

  • Series: MR8025
  • Models: MR8025L, MR8025M, MR8025H, MR8025E
  • Operating Voltage: 12 or 24 VDC
  • Bearing option: ball bearing or sleeve
  • Construction: UL94V-0 plastic impeller and frame
  • Air Flow: air exhaust over struts
  • Features: soft start, polarity protection, auto-restart
  • Options: tachometer output or locked rotor alarm signal; PWM speed control

The 80x25 cooling fan beside the 80x15 and the 80x38

The 80x25 is number 13 of the 18 DC axial fan cooling fans published here, listed from 25x10 to 120x38.

  • Frame side (a): 80 mm on the 80x25 cooling fan, the same on the 80x15 and the 80x38.
  • Frame thickness (t): 25.4 mm on the 80x25 cooling fan, against 15.3 mm on the 80x15 and 38 mm on the 80x38.
  • Mounting hole spacing (e): 71.5 mm on the 80x25 cooling fan, the same on the 80x15 and the 80x38.
  • Mounting hole diameter (dh): 4.5 mm on the 80x25 cooling fan, against 4.3 mm on the 80x15 and 4.3 mm on the 80x38.

Other sizes

Conventions

  • Simplified only: frame, mounting holes, illustrative rotor; frame and blades as two coloured solids. STEP AP214, millimetres, Z along the fan axis, outlet (strut) face at Z = 0, intake (front) at Z = t, airflow toward -Z.
  • Blades are illustrative, not any maker's design; frame, mounting holes and outline are from maker drawings.
  • Venturi bore (a + e)/2, hub, four struts, swept blades (seven from 60 mm, five below), rounded corners, edge fillets and chamfers and corner pockets are illustrative house rules, not any maker's dimensions.

Documents

Sources

delta-dc-axial, mechatronics-dc-axial, sunon-dc-fan-255e. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-DCFAN-DS-80x25.pdf

. CC-DCFAN-DS-80x25 revA '?) CommunityCAD Size datasheet - 80x25 80x25 DC axial fan Size datasheet: this frame's values with their levels, conventions and sources. Blades are illustrative, not any maker's design; frame, mounting holes and outline are from maker drawings. Frame 80 mm square, 25 mm…

View full datasheet →

docs/CC-DCFAN-SZ-80x25.pdf

DC axial fan, square frame, 80x25 Size drawing - 80x25 values on the views - scale 1:1 Sym. Dimensi Frame side Frame thickness Hole spacing Hole diameter Flange thickness (open corners) Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its…

View full datasheet →