EN 10365 UPN taper flange steel channel, UPN180
Size drawing - UPN180 values on the views - scale 1:1
slope = 8* %
UPN180
Depth 186
Flange width #
Web thickness 8.8 tf Flange thickness ri Root radius
r2 Toe radius
slope Inside flange slope, percent
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L16 - LO 1.
Notes
Flange slope from ArcelorMittal's sales programme, single source (ADR 0119 row 9). The half-millimetre radii are the lineages' (ADR 0119 row 11).
TITLE
'? CommunityCAD Size drawing, UPN180
STANDARDS FOLLOWED
EN 10365:2017, DIN 1026-1 (through free tables)
FAMILY / DETAIL
Taper flange steel channel - UPN180
SHEET
CC-EN10365-UPN-SZ-UPN180 A 1:1
REV SCALE PROJECTION
UNITS
Dimensions in mm
SPEC VERSION
LICENSE
3f1fObcc2F84058e6b82af2d668b32037245d475 CC-BY 4.0 IronPixel Labs LLC
PAGE
1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.