EN 10365 UPN taper flange steel channel, UPN120
Size drawing - UPN120 values on the views - enlarged 1.5:1
UPN120
Depth 126
Flange width ES
Web thickness 7.8
tf Flange thickness Dols
ri Root radius 9.8
r2 Toe radius
slope Inside flange slope, percent
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L16 - LO 1.
Notes
Flange slope from ArcelorMittal's sales programme, single source (ADR 0119 row 9). The half-millimetre radii are the lineages' (ADR 0119 row 11).
slope = 8* %
TITLE
'? CommunityCAD Size drawing, UPN120
STANDARDS FOLLOWED FAMILY / DETAIL
EN 10365:2017, DIN 1026-1 (through free tables) Taper flange steel channel - UPN120 SHEET REV SCALE PROJECTION UNITS CC-EN10365-UPN-SZ-UPN120 A 1.5:1 € Dimensions in mm SPEC VERSION LICENSE PAGE 3f1FfObcc2F84058e6b82aF2d668b32037245d475 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.