EN 10365 UPE parallel flange steel channel, UPE120
Size drawing - UPE120 values on the views - enlarged 1.5:1
UPE120
Depth 126
Flange width @
Web thickness 5.8
8.0
Flange thickness
12
Root radius
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L15.
TITLE
'? CommunityCAD Size drawing, UPE120
STANDARDS FOLLOWED FAMILY / DETAIL
EN 10365:2017, DIN 1026-2 (through free tables) Parallel flange steel channel - UPE120 SHEET REV SCALE PROJECTION UNITS CC-EN10365-UPE-SZ-UPE120 A 1.5:1 € Dimensions in mm SPEC VERSION LICENSE PAGE 3f1FfObcc2F84058e6b82aF2d668b32037245d475 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.