CC-EN10365-UPE-DS-UPE100 rev A Size datasheet - UPE100
'?) CommunityCAD
UPE100 parallel flange steel channel
Size datasheet: this size's values with their levels, conventions and sources.
Part keys en10365 -upe100x100 ... (one per stock length)
Files 6 STEP AP214 (simplified), one per stock length
UPE100, end view, 0.5:1
Sym. Dimension Value Level h Depth 100 L1-3 b Flange width 55 L1-3 tw Web thickness 4.5 L1-3 tf Flange thickness 7.5 L1- 3 r Root radius 10 L1- 3
Modeled value: nominal, else the midpoint of min-max. s / =: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
EN 10365:2017, DIN 1026-2 (through free tables) Page 1/2 Parallel flange steel channel - UPE100 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 3f1f0bcc2f84058e6b82af2d668b32037245d475
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
. CC-EN10365-UPE-DS-UPE100 rev A 0 CommunityCAD Size datasheet - UPE100
Lengths | Thread Part key
100 built - - en10365-upe100x100
250 built - - en10365-upe100x250
500 built - - en10365-upe100x500 1000 built - - en10365-upe100x1000 2000 built - - en10365-upe100x2000 6000 built S - en10365-upe100x6000
One STEP file per stock length.
Conventions
« Flanges and edges: Flanges tf thick with parallel faces; one root fillet r tangent to the web and the flange's inside face; square flange tips and sharp outer corners.
¢ Tolerances and detailing: Nominal section: the EN 10024, EN 10034 and EN 10279 tolerances aren't modeled, nor the sources' detailing columns (d, bolt size, e, p) or any holes.
« Ends, lengths, finish: Flat ends square to the length, sharp edges (a sawn bar). The stock lengths as file options, length tolerance not modeled. No markings. Mid-grey mill scale with bright sawn ends, appearance only.
Sources
Source Publisher Retrieved sha256
arceLlormittal-en10365-upe ArcelorMittal 2026-10-30 afO1falce4c5 (kept outside the repo) kocaer-en10365-upe Kocaer Steel 2026-10-31 4eff9c1483c2 (kept outside the repo) stad-en10365-upe STAD 2026-10-31 3ffdb0c648aa schweizer-fn-en10365-upe Schweizer-FN 2026-11-02 ceé50df333bF
The whole series (verification map, corrections, drawings): CC-EN10365-UPE-DS.
EN 10365:2017, DIN 1026-2 (through free tables) Page 2/2 Parallel flange steel channel - UPE100 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 3f1f0bcc2f84058e6b82af2d668b32037245d475
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.