RC servo, per maker model, hitec-hs422
Size drawing - hitec-hs422 values on the views - enlarged 2.5:1
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Case length . Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
Sym. Dimensi
Case width
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. Ear span LO = one source only: printed amber and marked *. c =a source value was corrected; the datasheet says how.
Case height
Ear height . . . . House convention = a detail no source dimensions,
drawn to a stated house rule. Ear thickness . This size's values: L2 15. Notes Hitec's image drawings read twice each (ADR 0055). Output boss, case parts, lead and label illustrative: sheet DO2.
Mounting hole spacing
Hole spacing across
Mounting hole diameter
Output position
Output position, far ear
Horn top above the case
Horn clearance over ears
Lead length (not modeled)
Connector length (not modeled)
Hc = 36.6
TITLE
'? CommunityCAD Size drawing, hitec-hs422
STANDARDS FOLLOWED FAMILY / DETAIL No published standard: each maker's own drawing RC servo - hitec-hs422
SHEET REV SCALE PROJECTION UNITS
CC-SERVO-SZ-hitec-hs422 A 2.5:1 € Dimensions in mm SPEC VERSION LICENSE PAGE 7c5F93bb2a1674Ffad1ed142d21F252056a66a74e CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.