SR44 Coin Cell Battery, IEC 60086 size drawing (PDF)

Datasheet — SR44 Coin Cell Battery, IEC 60086 by Milo

Open the PDF
SR44 Coin Cell Battery, IEC 60086Get the CAD modelSR44 Coin Cell Battery, IEC 60086CC-IEC60086-COIN-SZ-SR44.pdf

Text of this datasheet

IEC 60086 coin and button cell, SR44

Size drawing - SR44 values on the views - enlarged 5:1

Sym. Dimension SR44

11.425 11.25-11.60

Diameter

5.15

Overall height 4.90-5.40

r_neg = 1.5 ref* ; ; a d_cap Negative cap diameter

h_cap Negative cap height

r_neg Negative edge radius (LO)

Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. d= 11.425 < / = = the source gives only that limit, modeled at it. ref = reference. . . L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L1 2 - LO 2. d= 11.425 Notes 11.25-11.60 No IEC 60086 edition is read: the values are the makers' datasheets, reconciled (ADR 0034). r_neg: Energizer's reference radius, one lineage, so always LO; modeled by the owner's decision (#786 item 4). The cap step is modeled only where d_cap and h_cap reach L1; - = not given (sheet DO2).

TITLE

'? CommunityCAD Size drawing, SR44

STANDARDS FOLLOWED FAMILY / DETAIL IEC 60086 (no edition read: makers' datasheets) Coin and button cell - SR44

SHEET REV SCALE PROJECTION UNITS

CC-IEC60086-COIN-SZ-SR44 A 5:1 € Dimensions in mm SPEC VERSION LICENSE PAGE cfd05b053c736a4F15ba3030aa41febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.