Slide-in T-slot nut, per slot system and thread, s10-M8
Size drawing - s10-M8 values on the views - enlarged 6:1
Sym. Dimensi
Body width across the slot
Body length along the slot
Neck width
Overall height
Body height
Neck height
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L15 - LO 1.
Notes
No published standard: values from the makers' drawings (ADR 0034). House details are illustrative: sheet DO2.
TITLE
'? CommunityCAD Size drawing, s10-M8
STANDARDS FOLLOWED
No published standard (makers' drawings)
FAMILY / DETAIL
Slide-in T-slot nut - s10-M8
SHEET
CC-TNUTS-SZ-s10-M8 A 6:1
REV SCALE PROJECTION
UNITS
Dimensions in mm
SPEC VERSION
LICENSE
393cOd5eb300576c4b007f88cdde7Ffd1cO26d7F4 CC-BY 4.0 IronPixel Labs LLC
PAGE
1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.