Roll-in spring T-slot nut, per slot system and thread, s10-M5
Size drawing - s10-M5 values on the views - enlarged 6:1
Sym. Dimensi
Body width across the slot
Body length along the slot
Neck width
Overall height
Body height
Neck height
Thread position from the near end
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L1 4 - LO 3.
Notes
No published standard: values from the makers' drawings (ADR 0034).
House details are illustrative: sheet DO2.
TITLE
'? CommunityCAD Size drawing, s10-M5
STANDARDS FOLLOWED FAMILY / DETAIL
No published standard (makers' drawings) Roll-in spring T-slot nut - s10-M5 SHEET REV SCALE PROJECTION UNITS CC-TNUTR-SZ-s10-M5 A 6:1 € Dimensions in mm SPEC VERSION LICENSE PAGE 396e2be9a0822407d28c83bFf6F9ab16e4601efc CC-BY 4.0 IronPixel Labs LLC 1/1
seeecrcepo------
-
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.