slot 10 M5 Hammer-head T-slot Nut (Drop-in T-nut), Hammer-head T-slot nut

A neck 9.8 mm wide in the slot's opening, a body 17 mm by 10 mm, 9 mm high overall: the slot 10 M5 hammer-head T-slot nut. Get it as simplified and threaded STEP files.

How these parts are made, and what the levels mean: read the method

• Also searched as: slot 10 M5 T-slot nut
• Model id: slot-nuts-hammer-s10-m5
• Standard: Hammer-head T-slot nut · size slot 10 M5

Files

Part key	Simplified	Threaded
slot-nuts-hammer-s10-m5	STEP	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
w	Body width across the slot		17		17	nominal	L1
l	Body length along the slot		10		10	nominal	L0 (nom: one source)
b	Neck width		9.8		9.8	nominal	L1
h	Overall height		9		9	nominal	L1
k	Body height		6		6	nominal	L1
n	Neck height		3		3	nominal	L1

Drawing

As a PDF: CC-TNUTH-SZ-s10-M5.pdf.

The slot 10 M5 hammer-head T-slot nut beside the 30 B-type slot 8 M6 and the slot 10 M6

The slot 10 M5 is number 6 of the 8 Hammer-head T-slot nut hammer-head T-slot nuts published here, listed from 20 B-type slot 6 M3 to slot 10 M8.

• Body width across the slot (w): 17 mm on the slot 10 M5 hammer-head T-slot nut, against 15 mm on the 30 B-type slot 8 M6 and 17 mm on the slot 10 M6.
• Body length along the slot (l): 10 mm on the slot 10 M5 hammer-head T-slot nut, against 8 mm on the 30 B-type slot 8 M6 and 10 mm on the slot 10 M6.
• Neck width (b): 9.8 mm on the slot 10 M5 hammer-head T-slot nut, against 7.8 mm on the 30 B-type slot 8 M6 and 9.8 mm on the slot 10 M6.
• Overall height (h): 9 mm on the slot 10 M5 hammer-head T-slot nut, against 6.3 mm on the 30 B-type slot 8 M6 and 9 mm on the slot 10 M6.
• Body height (k): 6 mm on the slot 10 M5 hammer-head T-slot nut, against 5.5 mm on the 30 B-type slot 8 M6 and 6 mm on the slot 10 M6.
• Neck height (n): 3 mm on the slot 10 M5 hammer-head T-slot nut, against 0.8 mm on the 30 B-type slot 8 M6 and 3 mm on the slot 10 M6.

Other sizes

• One size smaller: 30 B-type slot 8 M6 Hammer-head T-slot Nut (Drop-in T-nut), Hammer-head T-slot nut, 15 mm × 8 mm, 6.3 mm high.
• One size larger: slot 10 M6 Hammer-head T-slot Nut (Drop-in T-nut), Hammer-head T-slot nut, 17 mm × 10 mm, 9 mm high.

Documents

• CC-TNUTH-DS-s10-M5.pdf: s10-M5 datasheet: values with levels, sources
• CC-TNUTH-SZ-s10-M5.pdf: s10-M5 drawing: this size's values on the views
• parts.json: the part record of this size (the platform contract)

Sources

misumi-hammer-nuts, motedis-hammer-nuts, rule-misumi-hammer-nut-neck, rule-motedis-hammer-nut-heights. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.