SD memory card, standard size, SD
Size drawing - SD values on the views - enlarged 5:1
| W = 24.00 23.90-24.10
O g : Z é
Dimension
32.00 31.90-32.10
Card length
24.00 23.90-24.10
Card width
2.10 1.95-2.25
Card thickness
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L1 3.
Notes
No free full standard: makers' data sheets (STEC, Swissbit), ADR 0126.
Chamfer, pads, slider, edge step, label recess, rounds, logo: illustrative, sheet DO2.
TITLE
'? CommunityCAD Size drawing, SD
STANDARDS FOLLOWED
FAMILY / DETAIL
SD Association (members-only); makers' data sheets SD card - SD
SHEET
CC-SDCARD-SZ-SD
REV SCALE PROJECTION
A 5:1
UNITS
Dimensions in mm
SPEC VERSION
LICENSE
9325b178989ac5d161502b81caa4f9ee4cfda308 CC-BY 4.0 IronPixel Labs LLC
PAGE
1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.