Extrusion end cap, per profile cross-section, s10-45x90
Size drawing - s10-45x90 values on the views - enlarged 2:1
Rr=3*
Sym. Dimensi
Cap width
Cap height
Seat thickness
Corner radius
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L1 2 - LO 2.
Notes
No published standard: values from the makers' drawings (ADR 0034). Plugs, face round and mark are illustrative: sheet DO2.
TITLE
'? CommunityCAD Size drawing, s10-45x90
STANDARDS FOLLOWED
No published standard (makers' drawings)
FAMILY / DETAIL
Extrusion end cap - s10-45x90
SHEET
CC-ENDCAP-SZ-s10-45x90 A 2:1
REV SCALE PROJECTION
UNITS
Dimensions in mm
SPEC VERSION
LICENSE
1195d6e9533baédb9eb2F578caes40746ef8dbb2 CC-BY 4.0 IronPixel Labs LLC
PAGE
1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.