CC-DIN906-DS-R3-4 revA Size datasheet - R 3/4
'?) CommunityCAD
DIN 906 R 3/4 hexagon socket pipe plug
Size datasheet: this size's values with their levels, conventions and sources.
Edition DIN 906:2020-02 a , Thread R 3/4, pitch 1.814 mm, R taper pipe thread (ISO 7-1), 55 degree profile, 1:16 taper, right hand a Part key din906-r3-4 Files 2 STEP AP214 (simplified + Simplified - R 3/4, front view, 1.5:1 Threaded - R 3/4, front view, 1.5:1 threaded)
Sym. Dimension
L Length 12 Ll - 2
s Socket across flats 12.122* lo -1 12.032-12.212
t1 Socket depth >6 La +2
P Thread pitch 1.814 l2-
d Major diameter at the gauge plane 26.441 L2-
d2 Pitch diameter at the gauge plane 25.279 l2-
d1 Minor diameter at the gauge plane 24.117 L2-3
a Gauge plane from the small end 9.5 Li + 2
h Thread height 1.162
Modeled value: nominal, else the midpoint of min-max; s at the middle of its band; t1, a minimum, at that limit. * amber: one source (LO): s rests on Torqbolt's limits alone (owner, #1201). c: a source value was corrected. Level - independent sources.
DIN 906:2020-02 - ISO 7-1 (thread) Page 1/2 Pipe plug - R 3/4 - both detail levels - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec b4ef85ef5b77026138e5e14e5d8d82b0c7d8dé6fe
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
CC-DIN906-DS-R3-4 revA Size datasheet - R 3/4
'?) CommunityCAD
Conventions
e Edition: DIN 906:2020-02; replaced by DIN 906:2026-08, which no free source prints.
¢ Thread over the whole length, right hand: a plain 1:16 cone at the simplified level, the 55° profile at the threaded level. No run-out. « 45° chamfer to the thread root at both ends: not specified by the standard, the large end's illustrative.
« Socket: sharp corners, flat floor at t1, no countersink. Not specified by the standard.
« No markings. Features the standard does not dimension are house conventions.
Sources
Source Publisher Retrieved sha256
iso228-1-2000-sample ISO (preview published by iTeh Standards) 2026-10-31 Sded4e3cb3ed (kept outside the repo)
wikipedia-bsp Wikipedia 2026-10-31 4984032FF722 etb-iso7-1 The Engineering ToolBox 2026-10-31 579aQe5f755d fasten-it-din906 fasten.it 2026-11-04 e0d677466F66 torqbolt-din906 Torqbolt 2026-11-04 fb473ac2b4ef
The whole series (verification map, drawings): CC- DIN906-Ds.
DIN 906:2020-02 - ISO 7-1 (thread) Page 2/2 Pipe plug - R 3/4 - both detail levels - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec b4ef85ef5b77026138e5e14e5d8d82b0c7d8dé6fe
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.