DIN 906 hexagon socket pipe plug, conical thread, R 1/2
Size drawing - R 1/2 values on the views - enlarged 5:1
sym. | Dimensio!
Length 10
10.100* 10.025-10.175
Socket across flats
25 Socket depth
Thread pitch
Major diameter at the gauge plane
Pitch diameter at the gauge plane
Minor diameter at the gauge plane
Gauge plane from the small end
Thread height
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 6 -L15-L0O1.
Notes
s: the middle of its band (ADR 0014), on one source's limits, single source (#1201). tlis a minimum, modeled at that limit (ADR 0002).
Edition: DIN 906:2020-02, replaced by 2026-08, which no free source prints (#1201). Thread over the whole length; d, d2, d1 at the gauge plane, on the 1:16 taper.
45° chamfer to the thread root at both ends: house convention, illustrative (DO2). Socket: sharp corners, flat floor, no countersink: house convention (DO2).
s = 10.100* 10.025-10.175
TITLE
'? CommunityCAD Size drawing, R 1/2
STANDARDS FOLLOWED FAMILY / DETAIL
DIN 906:2020-02 - ISO 7-1 (thread) Pipe plug - R 1/2
SHEET REV SCALE PROJECTION UNITS CC-DIN906-SZ-1-2 A 5:11 € Dimensions in mm
SPEC VERSION LICENSE PAGE
b4ef85ef5b77026138e5e14e5d8d82b0c7d8défe CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.