DIN 906 hexagon socket pipe plug, conical thread, R 1-1/4
Size drawing - R 1-1/4 values on the views - enlarged 2:1
sym. | Dimensio!
Length 18
22.170*
__ Socket across flats 22.065-22.275 2 : Socket depth 11.5 Thread pitch 2.309 Major diameter at the gauge plane 41.910 a=12.7 | _ Pitch diameter at the gauge plane 40.431 QT 1 Minor diameter at the gauge plane 38.952
d = 41.910 10.9
Gauge plane from the small end
Thread height 1.479
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 6 -L15-L0O1.
s = 22.170* Notes 22.065-22.275
s: the middle of its band (ADR 0014), on one source's limits, single source (#1201). tlis a minimum, modeled at that limit (ADR 0002).
Edition: DIN 906:2020-02, replaced by 2026-08, which no free source prints (#1201). Thread over the whole length; d, d2, d1 at the gauge plane, on the 1:16 taper.
45° chamfer to the thread root at both ends: house convention, illustrative (DO2). Socket: sharp corners, flat floor, no countersink: house convention (DO2).
TITLE
'? CommunityCAD Size drawing, R 1-1/4
STANDARDS FOLLOWED FAMILY / DETAIL
DIN 906:2020-02 - ISO 7-1 (thread) Pipe plug - R 1-1/4
SHEET REV SCALE PROJECTION UNITS CC-DIN906-SZ-1-1-4 A 2:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE b4ef85ef5b77026138e5e14e5d8d82b0c7d8défe CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.