DIN 906 hexagon socket pipe plug, conical thread, R 1-1/2
Size drawing - R 1-1/2 values on the views - enlarged 2:1
sym. | Dimensio!
Length 20
24.170* 24.065-24.275
Socket across flats
> Socket depth 211.5
Thread pitch Zo!
Major diameter at the gauge plane 47,803
Pitch diameter at the gauge plane 46.324
Minor diameter at the gauge plane 44 B45
12.7
Gauge plane from the small end
Thread height 1.479
Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 6 -L15-L0O1. Notes s: the middle of its band (ADR 0014), on one source's limits, single source (#1201). s = 24.170* tlis a minimum, modeled at that limit (ADR 0002). 24.065-24.275 Edition: DIN 906:2020-02, replaced by 2026-08, which no free source prints (#1201). Thread over the whole length; d, d2, d1 at the gauge plane, on the 1:16 taper. 45° chamfer to the thread root at both ends: house convention, illustrative (DO2). Socket: sharp corners, flat floor, no countersink: house convention (DO2).
TITLE
'? CommunityCAD Size drawing, R 1-1/2
STANDARDS FOLLOWED FAMILY / DETAIL
DIN 906:2020-02 - ISO 7-1 (thread) Pipe plug - R 1-1/2
SHEET REV SCALE PROJECTION UNITS CC-DIN906-SZ-1-1-2 A 2:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE b4ef85ef5b77026138e5e14e5d8d82b0c7d8défe CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.