v0.1 | MAY 2020 PAMS: Small Button Mount Cy Makers Making ASSEMBLY GUIDE ANeiSqir Program
---
V0.1 | MAY 2020
PAMS: Small Button Mount Cy Makers Making ASSEMBLY GUIDE ANeil Squire Program PARTS
ID Description QTy 1 | PVC Elbow 90 deg, %” 2 | PVC Pipe, %”, 30 mm length
3 | PVC Pipe, %”, 30 mm OR 70 mm for use with Quick Clamp 2 G5 © 2020 by Neil Squire. “Assembly Guide” licensed under the CC BY SA 4.0 License: http://creativecommons.org/licenses/by-sa/4.0
Design files available at https://www.makersmakingchange.com/project/pams-small-button-mount/ PAGE 2 OF 4
---
V0.1 | MAY 2020
PAMS: Small Button Mount Cy Makers Making ASSEMBLY GUIDE ANeitSqure Program
TOOLS AND SUPPLIES
Pvc CEMENT
Description
PVC Cutters OR Hacksaw
PVC Cement (Optional)
---
V0.1 | MAY 2020
PAMS: Small Button Mount Cy Makers Making ASSEMBLY GUIDE ANeitSqure Program
PEE SX
0 1 Use the PVC cutters or hacksaw to cut the PVC e pipe to length.
oy F%® S%
03 - Insert an elbow onto each pipe section. 04 - Repeat Steps 2 and 3 to create a second side.
02 - _ Insert two short PVC sections into an elbow.
08 (Optional) Disassemble and reassemble with PVC © cement. Erase pencil marks.
07 - (Optional) Use pencil to mark lines across joints.
[eyersa |