ASTM A733 NPT steel pipe nipple, Schedule 40, NPS 3/4
Size drawing - NPS 3/4 values on the views - L = 50.8 shown - enlarged 2:1
sym. Dimensi NPS 3/4 Le Close nipple length 34.925
Close nipple length (in) 1.375
Pipe outside diameter 26.67
Wall thickness, Schedule 40 2.8702
Threads per inch 14
Thread pitch (in)
Pitch diameter at L1 (in)
Hand-tight engagement (in)
Effective thread length (in)
Overall thread length (in)
Thread height (in)
Source levels
Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both.
L4 = 0.7935 < / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
L1 = 0.339 LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
L2 = 0.5457
This size's values: L115.
Notes
mm unless marked (in): the thread rows are ASME B1.20.1's inches, x 25.4 exact. Lengths: the close nipple and the stock lengths two A733 makers list (DO1). Pipe: ASME B36.10 Schedule 40, nominal OD and wall; no weld seam.
Each end: full thread to L2, vanish threads to L4 on D (ADR 0127 row 5).
45° chamfer to the thread root at each end: house convention (DO2).
NPS 3/4 lengths: close (1-3/8 in) to 12 in, 17 parts; shown at 2 in.
TITLE
'? CommunityCAD Size drawing, NPS 3/4
STANDARDS FOLLOWED FAMILY / DETAIL
ASTM A733 - ASME B36.10 (pipe) - ASME B1.20.1 (thread) Pipe nipple - NPS 3/4
SHEET REV SCALE PROJECTION UNITS CC-ASTMA733-SZ-3-4 A 2:1 € Dimensions in mm SPEC VERSION LICENSE PAGE
946d39588085996aee8F621a618103eb3a8F37bd CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.