ASME B36.10 steel pipe, nps1-8-sch40
Size drawing - nps1-8-sch40 values on the views - enlarged 8:1
D = 10.287
Sym. Dimensi
Outside diameter, mm
Wall thickness, mm
D in Outside diameter, inches
T in Wall thickness, inches
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L1 4.
Notes
Sizes: nps<NPS>-sch<schedule>, nps1-1-4-sch40 = NPS 1-1/4 Schedule 40. D and T in mm are the inch values x 25.4, exact (ADR 0129 row 8).
TITLE
'? CommunityCAD Size drawing, nps1-8-sch40
STANDARDS FOLLOWED
ASME B36.10 (through free tables)
FAMILY / DETAIL Steel pipe - nps1-8-sch40
SHEET
CC-ASMEB36-10-SZ-nps1-8-sch40 | A 8:1
REV SCALE PROJECTION
UNITS
Dimensions in mm
SPEC VERSION
LICENSE
b4ef85ef5b77026138e5e14e5d8d82b0c7d8défe CC-BY 4.0 IronPixel Labs LLC
PAGE
1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.