CC-ASTMA733-DS-NPS1-1-4 revA Size datasheet - NPS 1-1/4
'?) CommunityCAD
ASTM A733 NPS 1-1/4 NPT steel pipe nipple, Schedule 40
Size datasheet: this size's values with their levels, its lengths, conventions and sources.
Thread NPS 1-1/4, 11.5 threads per a) inch, NPT taper pipe thread (ASME B1.20.1), 60 degree profile, 1:16 taper, right hand Lengths 16 generated, close (1-5/8 in) Ls to12in Files 32 STEP AP214 (simplified + Simplified - NPS 1-1/4 x 2-1/2 in, front Threaded - NPS 1-1/4 x 2-1/2 in, front threaded) view, 0.3:1 view, 0.3:1 Sym. Dimens' Value Level Le Close nipple length 41.275 La - 2 Le in Close nipple length (in) 1.625 1-2 D Pipe outside diameter 42.164 L1- 2 T Wall thickness, Schedule 40 3.556 L1- 2 n Threads per inch 11.5 1-4 P Thread pitch (in) 0.087 1-3 E1 Pitch diameter at L1 (in) 1.5834 L1- 3 L1 Hand-tight engagement (in) 0.420 L1- 3 L2 Effective thread length (in) 0.7068 1-3 L4 Overall thread length (in) 1.0085 l1- 3 h Thread height (in) 0.0696 La - 2
Modeled value: nominal. Rows marked (in) are inches as ASME writes them. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
ASTM A733 - ASME B36.10 (pipe) : ASME B1.20.1 (thread) Page 1/2 Pipe nipple - NPS 1-1/4 - both detail levels - Dimensions in mm - CC- BY 4.0, lronPixel Labs LLC spec 946d39588085996aee8F621a618103eb3a8F37bd
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
'?) CommunityCAD
CC-ASTMA733-DS-NPS1-1-4 revA Size datasheet - NPS 1-1/4
Lengths
Middle in
41.275 threads meet 1-5/8 close 50.8 threads meet 2 63.5 plain middle 2-1/2 76.2 plain middle 3 88.9 plain middle 3-1/2 101.6 plain middle 4 114.3 plain middle 4-1/2 127 plain middle 5 139.7 plain middle 5-1/2 152.4 plain middle 6 177.8 plain middle 7 203.2 plain middle 8 228.6 plain middle 9 254 plain middle 10 279.4 plain middle 11 304.8 plain middle 12
Part key
astm-a733-nps1-1-4x41-275 astm-a733-nps1-1-4x50-8 astm-a733-nps1-1-4x63-5 astm-a733-nps1-1-4x76-2 astm-a733-nps1-1-4x88-9 astm-a733-nps1-1-4x101-6 astm-a733-nps1-1-4x114-3 astm-a733-nps1-1-4x127 astm-a733-nps1-1-4x139-7 astm-a733-nps1-1-4x152-4 astm-a733-nps1-1-4x177-8 astm-a733-nps1-1-4x203-2 astm-a733-nps1-1-4x228-6 astm-a733-nps1-1-4x254 astm-a733-nps1-1-4x279-4 astm-a733-nps1-1-4x304-8
One STEP file per length and detail level. Close: the threads from both ends meet; every longer length has a plain middle unless marked.
Conventions
e Each end: ASME B1.20.1's pipe end, full thread to L2, the vanish threads to L4 on the pipe OD; both ends right hand. e 45° chamfer to the thread root at each end: not specified by the standard (A733's 35° +/- 10°, per Anvil, includes it). « Bore: the Schedule 40 inside diameter, straight through. No weld seam, no markings.
Sources Source Publisher wikipedia-npt Wikipedia
engineersedge-npt etb-npt
engineersedge-npt-basic
Engineers Edge
The Engineering ToolBox Engineers Edge
uLtimatewasher-npt Ultimate Washer steeltube-b36-10 Zeleziarne Podbrezova (steeltube.sk) etb-b36-10 The Engineering ToolBox anvil-a733-nipples Anvil International
smithcooper-a733-nipples Smith - Cooper International
The whole series (verification map, drawings): CC- ASTMA733-DS.
ASTM A733 - ASME B36.10 (pipe) : ASME B1.20.1 (thread) Pipe nipple - NPS 1-1/4 - both detail levels - Dimensions in mm - CC- BY 4.0, lronPixel Labs LLC
Retrieved sha256
2026-10-31 7d42070d22a9 2026-10-31 bdb56cé6ad930 2026-10-31 134fa11c31leb 2026-11-04 816d737a76bb 2026-11-04 d89df9aeba62 2026-11-04 0b155035abaa 2026-11-04 219d17aSdca2 2026-11-05 e2f041a5465a 2026-11-05 246748384450
Page 2/2 spec 946d39588085996aee8F621a618103eb3a8F37bd
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.