MR95-2Z Miniature Ball Bearing (MR Bearing), Shielded, MR series
For a 5 mm shaft and a 9 mm housing bore, the MR95-2Z miniature ball bearing (MR series, shielded) is 3 mm wide. Modeled as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also searched as: MR95-2Z bearing
- Model id:
bearings-miniature-mr95-2z
- Standard: MR series · size MR95
Files
| Part key | Simplified |
|---|
bearings-miniature-mr95-2z | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Bore diameter | | 5 | | 5 | nominal | L1 |
| D | Outside diameter | | 9 | | 9 | nominal | L1 |
| B | Width | | 3 | | 3 | nominal | L1 |
| r | Chamfer dimension | 0.1 | | | 0.1 | single limit (min), modeled at the limit | L1 |
Drawing

As a PDF: CC-BRG-MINI-SZ-MR95.pdf.
The MR95-2Z miniature ball bearing beside the MR85-2Z and the MR105-2Z
The MR95-2Z is number 6, counting from the smallest, of the 13 MR series miniature ball bearings published here, from MR63-2Z to MR148-2Z.
- Bore diameter (d): 5 mm on the MR95-2Z miniature ball bearing, the same on the MR85-2Z and the MR105-2Z.
- Outside diameter (D): 9 mm on the MR95-2Z miniature ball bearing, against 8 mm on the MR85-2Z and 10 mm on the MR105-2Z.
- Width (B): 3 mm on the MR95-2Z miniature ball bearing, against 2.5 mm on the MR85-2Z and 4 mm on the MR105-2Z.
- Chamfer dimension (r): at least 0.1 mm on the MR95-2Z miniature ball bearing, against at least 0.08 mm on the MR85-2Z and at least 0.1 mm on the MR105-2Z.
The MR95-2Z miniature ball bearing in its other versions
Other sizes
- One size smaller: MR85-2Z Miniature Ball Bearing (MR Bearing), Shielded, MR series, 5 mm bore, 8 mm OD, 2.5 mm wide.
- One size larger: MR105-2Z Miniature Ball Bearing (MR Bearing), Shielded, MR series, 5 mm bore, 10 mm OD, 4 mm wide.
Documents
Sources
nmb-miniature, nsk-miniature. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.