MR74 Miniature Ball Bearing (MR Bearing), MR series
For a 4 mm shaft and a 7 mm housing bore, the MR74 miniature ball bearing (MR series) is 2 mm wide. Modeled as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also searched as: MR74 bearing
- Model id:
bearings-miniature-mr74
- Standard: MR series · size MR74
Files
| Part key | Simplified |
|---|
bearings-miniature-mr74 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Bore diameter | | 4 | | 4 | nominal | L1 |
| D | Outside diameter | | 7 | | 7 | nominal | L1 |
| B | Width | | 2 | | 2 | nominal | L1 |
| r | Chamfer dimension | 0.08 | | | 0.08 | single limit (min), modeled at the limit | L1 |
Drawing

As a PDF: CC-BRG-MINI-SZ-MR74.pdf.
The MR74 miniature ball bearing beside the MR63 and the MR84
The MR74 is number 2, counting from the smallest, of the 12 MR series miniature ball bearings published here, from MR63 to MR148.
- Bore diameter (d): 4 mm on the MR74 miniature ball bearing, against 3 mm on the MR63 and 4 mm on the MR84.
- Outside diameter (D): 7 mm on the MR74 miniature ball bearing, against 6 mm on the MR63 and 8 mm on the MR84.
- Width (B): 2 mm on the MR74 miniature ball bearing, the same on the MR63 and the MR84.
- Chamfer dimension (r): at least 0.08 mm on the MR74 miniature ball bearing, against at least 0.08 mm on the MR63 and at least 0.1 mm on the MR84.
The MR74 miniature ball bearing in its other versions
Other sizes
Documents
Sources
nmb-miniature, nsk-miniature. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.