CC-BRG-MINI-DS-MR63 rev A Size datasheet - MR63
'?) CommunityCAD
MR series MR63 miniature ball bearing
Size datasheet: this bearing's values with their levels, conventions and sources, a row per product as sold.
For 3 mm shafts
Part keys bearings - miniature - mr63, bearings - miniature - mr63- 2z, bearings- miniature -mr63- 2rs
Files 3 STEP AP214 (simplified) Built from open MR63 - 2Z MR63ZZ - 2RS MR63ZZ MR63ZZ, front view, 6:1 MR63ZZ, view from above, 4:1 ORS Width as the shielded bearing; sealed row not listed by the sources. Sym. Dimension Value Level d Bore diameter, MR63 3.000 la - 3 D Outside diameter, MR63 6.000 la - 3 B Width, MR63 2.000 1-3 r Chamfer dimension r_s min, MR63 2 0.080 la - 3 d Bore diameter, MR63ZZ 3.000 1-2 D Outside diameter, MR63ZZ 6.000 1-2 B Width, MR63ZZ 2.500 l1 +2 r Chamfer dimension r_s min, MR63ZZ > 0.080 l1 +2
Modeled value: nominal, else the midpoint of min-max. =: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
No published standard: NSK, MinebeaMitsumi and NTN listings Page 1/2 Miniature ball bearing - MR63 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 70b2bf787ea8F07904ce030af50bcaf231F0c68F
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
* CC-BRG-MINI-DS-MR63 rev A '?) CommunityCAD Size datasheet - MR63
Conventions
e Rings and corners: Bore d, outside diameter D and width B at the nominals of the product's own row; the rings concentric, their faces flush. Ring corners are quarter-rounds of r_s min; the shape isn't specified.
« Ring faces: Each ring's face is (D - d)/8 wide; the annulus between them is the middle half of the radial section.
¢ Shield and seal (2Z, 2RS): A flat annulus recessed r_s min / 2 below the ring faces, the same for both: no groove, snap wire or lip. Each is built from its own row; a 2RS with no sealed row listed takes the shielded row, labelled.
« Open bearing: The annulus recessed B/4 per face, leaving a solid web between the rings. Balls, cage and raceways are not modeled. « Values: d, D and B at their nominals; r at r_s min, the only limit the sources give. * Markings and grades: No markings. Tolerance class, internal clearance and lubricant are not geometry: one model per bearing and product.
Sources Source Publisher Retrieved sha256 nsk-miniature NSK 2026-10-28 5a2a0c17b82F nmb-miniature MinebeaMitsumi (NMB) 2026-10-29 96fa41F62F5d ntn-bearingfinder-miniature NTN Americas 2026-10-29 7779Fbd2eb5b
The whole series (verification map, corrections, drawings): CC-BRG-MINI-DS.
No published standard: NSK, MinebeaMitsumi and NTN listings Page 2/2
Miniature ball bearing - MR63 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 70b2bf787ea8F07904ce030af50bcaf231F0c68F
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.