MR137 Miniature Ball Bearing (MR Bearing), MR series
For a 7 mm shaft and a 13 mm housing bore, the MR137 miniature ball bearing (MR series) is 3 mm wide. Modeled as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also searched as: MR137 bearing
- Model id:
bearings-miniature-mr137
- Standard: MR series · size MR137
Files
| Part key | Simplified |
|---|
bearings-miniature-mr137 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Bore diameter | | 7 | | 7 | nominal | L1 |
| D | Outside diameter | | 13 | | 13 | nominal | L1 |
| B | Width | | 3 | | 3 | nominal | L1 |
| r | Chamfer dimension | 0.15 | | | 0.15 | single limit (min), modeled at the limit | L1 |
Drawing

As a PDF: CC-BRG-MINI-SZ-MR137.pdf.
The MR137 miniature ball bearing beside the MR117 and the MR128
The MR137 is number 10, counting from the smallest, of the 12 MR series miniature ball bearings published here, from MR63 to MR148.
- Bore diameter (d): 7 mm on the MR137 miniature ball bearing, against 7 mm on the MR117 and 8 mm on the MR128.
- Outside diameter (D): 13 mm on the MR137 miniature ball bearing, against 11 mm on the MR117 and 12 mm on the MR128.
- Width (B): 3 mm on the MR137 miniature ball bearing, against 2.5 mm on the MR117 and 2.5 mm on the MR128.
- Chamfer dimension (r): at least 0.15 mm on the MR137 miniature ball bearing, against at least 0.1 mm on the MR117 and at least 0.1 mm on the MR128.
The MR137 miniature ball bearing in its other versions
Other sizes
Documents
Sources
nmb-miniature, nsk-miniature. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.