Miniature deep groove ball bearing, MR series, MR105
Size drawing - MR105 values on the views - MR105ZZ shown. Built from: open MR105 - 2Z MR105ZZ - 2RS MR105ZZ - enlarged 5:1
| D = 10.000
View from above
Bearing
MR105 10.000 MR1052Z 10.000
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L18.
Notes
2 r: the sources give r_s min only; modeled at that limit.
A row is a product as sold: no suffix open, ZZ shielded (2Z), DD or VV sealed (2RS). Ring corners, faces and the shield recess are house conventions, sheet DO2. 2RS: width as the shielded bearing; sealed row not listed by the sources.
TITLE
'? CommunityCAD Size drawing, MR105
STANDARDS FOLLOWED No published standard: NSK, MinebeaMitsumi and NTN listings
FAMILY / DETAIL
Miniature ball bearing - MR105
SHEET
CC-BRG-MINI-SZ-MR105 A 5:1
REV SCALE PROJECTION
UNITS
Dimensions in mm
SPEC VERSION
LICENSE
70b2bf787ea8F07904ce030afSObcaf231F0c68F CC-BY 4.0 IronPixel Labs LLC
PAGE
1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.