microSD memory card, microSD
Size drawing - microSD values on the views - enlarged 6:1
Source levels Cink ros Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where RS = 0.80" Contact-end width : 9.60-9.80 the source gives both. R3 = 0.80* </> = the source gives only that limit, 0.70-0.90 Overall length 14.99-15.10 modeled at it. ref = reference.
' L2 = the standard itself (or its complete R7 = 30.00* Narrow edge length . 6.30-6.50 . . . 29.50-30.50 free preview, or the maker's drawing).
Overall width 10.90-11.10
Notch position . .80-8.00 L1 = two or more independent sources agree: the release gate. Notch length : -10-1.30 LO = one source only: printed amber and marked *. Overall thickness (ridge) . -90-1.10 c = a source value was corrected; the A=11.00 Card thickness : -60-0.80 datasheet says how. ; 10.90-11.10 House convention = a detail no source Grip ridge extent : +64-2.04 dimensions, drawn to a stated house rule. This size's values: L15 - LO 36. Grip ridge arc 29.50-30.50 Notes Single source: the SD Association's table, reprinted by two makers (Delkin, Chamfer length . -42-0.62 Silicon Power); A, A1, B, C, C1 also in B1=6.40* R4 = 0.80* the simplified specification's Figure H-2 6.30-6.50 0.70-0.90 Contact-end corner, straight 0 -70-8.90 (ADR 0126). Notch depth and logo: illustrative, sheet DO2. Pads flush; R10, R11 not modeled.
Grip ridge top ° 1.30-1.70
Chamfer depth ° .20-0.40
R6 = 0.80* R1, R2 Contact-end corner, notch . .70-0.90
0.70-0.90 B10 = 7.90* Grip-end corner, straight 70-0.98 B2 = 1.84* 7.80-8.00 ip: corner, straig ° . .
1.64-2.04
Grip-end corner, notch . -70-0.90
Slant blend (narrow edge) 5 .20-0.60
C =1.00 ml _ C2 = 0.30* Slant blend (full width) . -20-0.60
Pad row offset (basic)
Outer pad centres Pad pitch (basic) Pad width
Short pad length
BS = 2.90* 2.80-3.00 Long pad start
A5 = 0.80* Short pad start
0.75-0.85 A4=T
A2 = 3.85*
TITLE
'? CommunityCAD Size drawing, microSD
STANDARDS FOLLOWED FAMILY / DETAIL SD Association (members-only); simplified spec 6.00; makers' reprints microSD card - microSD
SHEET REV SCALE PROJECTION UNITS
CC-MICROSD-SZ-MICROSD A 6:1 € Dimensions in mm SPEC VERSION LICENSE PAGE 0.20-0.40 70b2bf787ea8F07904ce030aFfS0bcaf231F0cé68F CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.