microSD Card size drawing (PDF)

Datasheet — microSD Card by Milo

Open the PDF
microSD CardGet the CAD modelmicroSD CardCC-MICROSD-SZ-MICROSD.pdf

Text of this datasheet

microSD memory card, microSD

Size drawing - microSD values on the views - enlarged 6:1

Source levels Cas ros Main value = the modeled value ' (nominal, else the middle of min-max). ‘ B = 15.00 Overall width 10-90-41. 16 Grey under a value = its min-max, where

= * . . R5 = 0.80 14.90-15.10 Gayaecadleafaty . ODED the source gives both.

7 T 0.70-0.90 R3 = 0.80* < / = = the source gives only that limit, 0.70-0.90 Overall length 14.99-15.10 modeled at it. ref = reference.

L2 = the standard itself (or its complete R7 = 30.00* Narrow edge length . 6.30-6.50 . . . 29.50-30.50 free preview, or the maker's drawing).

Notch position . .80-8.00 L1 = two or more independent sources

agree: the release gate.

Notch length : -10-1.30 LO = one source only: printed amber and

marked *.

Overall thickness (ridge) . -90-1.10

c = a source value was corrected; the

ee Card thickness : -60-0.80 datasheet says how.

House convention = a detail no source

Grip ridge extent : +64-2.04 dimensions, drawn to a stated house

rule.

This size's values: L15 - LO 36.

Grip ridge arc 29.50-30.50 Notes

Single source: the SD Association's

table, reprinted by two makers (Delkin,

Chamfer length . -42-0.62 Silicon Power); A, A1, B, C, C1 also in

B1=6.40* R4 = 0.80* the simplified specification's Figure H-2 6.30-6.50 0.70-0.90 Contact-end corner, straight 0 -70-8.90 (ADR 0126).

Notch depth and logo: illustrative, sheet R6 = 0.80* B11 = 1.20* R1, R2 _ Contact-end corner, notch : -79-0.90 DO2. Pads flush; R10, R11 not modeled.

0.70-0.90 B2 = 1.84* 110-130 1 B10 = 7.90* 1.64-2.04 7.80-8.00

Grip ridge top ° 1.30-1.70

Chamfer depth ° .20-0.40

Grip-end corner, straight ° .70-0.90

B3 = 1.50* B4 = 0.52* Grip-end corner, notch . -70-8.90

1.30-1.70 0.42-0.62 H Slant blend (narrow edge) 5 .20-0.60

C=1.00 C2 = 0.30* Slant blend (full width) . -20-0.60

0.60-0.80 Pad row offset (basic)

Outer pad centres Pad pitch (basic) Pad width

Short pad length

BS = 2.90* 2.80-3.00 Long pad start

A5 = 0.80* Short pad start

0.75-0.85 A4 = 1.10*

A2 = 3.85*

TITLE

'? CommunityCAD Size drawing, microSD

STANDARDS FOLLOWED FAMILY / DETAIL SD Association (members-only); simplified spec 6.00; makers' reprints microSD card - microSD SHEET REV SCALE PROJECTION UNITS

B8 = 1.10* 1.00-1.20 CC-MICROSD-SZ-MICROSD A 6:1 € Dimensions in mm SPEC VERSION LICENSE PAGE

87 50,30" 304229b833a653b73db51178a38d40486ee7c36b CC-BY 4.0 IronPixel Labs LLC 1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.