RC servo, per maker model, hitec-hs55
Size drawing - hitec-hs55 values on the views - enlarged 4:1
Sym. Dimensi
Case length
Case width
Case height
Ear span
Ear height
Ear thickness
Mounting hole di.
Output position
Hsh Shoulder height
hw Horn top above t!
lw Lead length (not
Source levels hitec-hs55 Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c =a source value was corrected; the datasheet says how. House convention = a detail no source dimensions,
22.8
drawn to a stated house rule.
This size's values: L2 16.
Notes
Hitec's image drawings read twice each (ADR 0055). Output boss, case parts, lead and label illustrative: sheet DO2.
Mounting hole spacing
iameter
xf Output position, far ear
hh Horn top above the case
hu Horn clearance over ears
he ears
modeled)
Connector length (not modeled)
'? CommunityCAD
TITLE
Size drawing, hitec-hs55
STANDARDS FOLLOWED
FAMILY / DETAIL
No published standard: each maker's own drawing RC servo - hitec-hs55
SHEET REV
CC-SERVO-SZ-hitec-hs55 A
SCALE PROJECTION UNITS
41 Dimensions in mm
SPEC VERSION 7c593bb2a1674Ffad1ed142d21F252056a66a74e
LICENSE PAGE CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.