Flanged miniature deep groove ball bearing, F and MF series, MF128
Size drawing - MF128 values on the views - MF128ZZ shown. Built from: open MF128 - 2Z MF128ZZ - 2RS MF128ZZ - enlarged 5:1
Bearing
MF128 12.000 13.200 MF1282Z 12.000 13.600
Source levels
Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule.
C1 = 0.800 { This size's values: L112.
Notes / 2 r: the sources give r_s min only; modeled at that limit. D1= 13.600 " A row is a product as sold: no suffix open, ZZ shielded (2Z), DD or VV sealed (2RS). Ring corners, faces and the shield recess, and the flange's edges, are house conventions, sheet D0O2. 2RS: width as the shielded bearing; sealed row not listed by the sources.
D1 = 13.600
View from above
TITLE
'? CommunityCAD Size drawing, MF128
STANDARDS FOLLOWED FAMILY / DETAIL
No published standard: NSK, MinebeaMitsumi and NTN listings Flanged miniature ball bearing - MF128 SHEET REV SCALE PROJECTION UNITS CC-BRG-MINI-FL-SZ-MF128 A 5:11 € Dimensions in mm
SPEC VERSION LICENSE PAGE 70b2bf787ea8F07904ce030afS0bcaf231F0c68F CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.