Flanged miniature deep groove ball bearing, F and MF series, MF105
Size drawing - MF105 values on the views - MF105ZZ shown. Built from: open MF105 - 2Z MF105ZZ - 2RS MF105ZZ - enlarged 5:1
Bearing
MF105 10.000 11.200 MF1052Z 10.000 11.600
Source levels
Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L112.
Cl= 0.800 { Notes . / 2 r: the sources give r_s min only; modeled at that limit.
A row is a product as sold: no suffix open, ZZ shielded (2Z), DD or VV sealed (2RS). D1 = 11.600 Ring corners, faces and the shield recess, and the flange's edges, are house conventions, sheet D0O2.
2RS: width as the shielded bearing; sealed row not listed by the sources.
| D1 = 11.600
View from above
TITLE
'? CommunityCAD Size drawing, MF105
STANDARDS FOLLOWED FAMILY / DETAIL No published standard: NSK, MinebeaMitsumi and NTN listings Flanged miniature ball bearing - MF105
SHEET REV SCALE PROJECTION UNITS
CC-BRG-MINI-FL-SZ-MF105 A 5:11 € Dimensions in mm
SPEC VERSION LICENSE PAGE 70b2bf787ea8F07904ce030af50bcaf231F0c68F CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.