Heat-set threaded insert, per thread and length, M8x12.7
Size drawing - M8x12.7 values on the views - enlarged 8:1
Dimension M8x12.7
Length
di Knurl outside diameter
d2 Pilot diameter
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L11-LO 2.
Notes
No published standard: values from the makers' tables (ADR 0034). Knurl, groove, lead and pilot proportions are illustrative: sheet DO2.
TITLE
'? CommunityCAD Size drawing, M8x12.7
STANDARDS FOLLOWED
No published standard (makers' tables)
FAMILY / DETAIL
Heat-set threaded insert - M8x12.7
SHEET
CC-HSINSERT-SZ-M8x12.7 A 8:1
REV SCALE PROJECTION
UNITS
Dimensions in mm
SPEC VERSION
LICENSE
1431dca0786db211c4968b488128bf6d30bccSdb CC-BY 4.0 IronPixel Labs LLC
PAGE
1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.