M8x12.7 Heat-set Insert size drawing (PDF)

Datasheet — M8x12.7 Heat-set Insert by Milo

Open the PDF
M8x12.7 Heat-set InsertGet the CAD modelM8x12.7 Heat-set InsertCC-HSINSERT-SZ-M8x12.7.pdf

Text of this datasheet

Heat-set threaded insert, per thread and length, M8x12.7

Size drawing - M8x12.7 values on the views - enlarged 8:1

Dimension M8x12.7

Length di Knurl outside diameter

d2 Pilot diameter

Source levels

Main value = the modeled value (nominal, else the middle of min-max).

Grey under a value = its min-max, where the source gives both.

< / = = the source gives only that limit, modeled at it. ref = reference.

L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.

LO = one source only: printed amber and marked *.

c = a source value was corrected; the datasheet says how.

House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L11-LO 2.

Notes

No published standard: values from the makers' tables (ADR 0034).

Knurl, groove, lead and pilot proportions are illustrative: sheet DO2.

"@d1 = 10.1*c

‘@d2 = 9.5*

TITLE

'? CommunityCAD Size drawing, M8x12.7

STANDARDS FOLLOWED FAMILY / DETAIL

No published standard (makers' tables) Heat-set threaded insert - M8x12.7 SHEET REV SCALE PROJECTION UNITS CC-HSINSERT-SZ-M8x12.7 A 8:1 € Dimensions in mm SPEC VERSION LICENSE PAGE 304229b833a653b73db51178a38d40486ee7c36b CC-BY 4.0 IronPixel Labs LLC 1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.