M8 Thin Square Nut, DIN 562 size drawing (PDF)

Datasheet — M8 Thin Square Nut, DIN 562 by Milo

Open the PDF
M8 Thin Square Nut, DIN 562Get the CAD modelM8 Thin Square Nut, DIN 562CC-DIN562-SZ-M8.pdf

Text of this datasheet

DIN 562 thin square nut, M8

Size drawing - M8 values on the views - enlarged 5:1

Sym. Dimensi

Thread pitch (coarse) 1.25

12.785 12.57-13

Width across flats

2 16.5 Width across corners

3.76 3.52-4

Nut height

D1 Basic minor diameter (crests) 6.6468

tap Tap drill (method D - P) Gots

Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. s = 12.785 House convention = a detail no source dimensions, drawn to a stated house rule. 12.57-13 This size's values: L2 1-L19. Notes s, m: the nominal is the max; modeled at the middle of the band (ADR 0014). s min and m min are the makers' band, the widest stated (ADR 0071, owner, #804). e is not modeled on its own: the sharp square gives e = s-v2 from the modeled s, checked. Both faces plain and sharp: no chamfer, no countersink (ADR 0079).

e216.5

View from above (either face)

TITLE

'? CommunityCAD Size drawing, M8

STANDARDS FOLLOWED FAMILY / DETAIL

DIN 562:2013-05 - ISO 68-1/ ISO 261 (thread) Thin square nut - M8

SHEET REV SCALE PROJECTION UNITS CC-DIN562-SZ-M8 A 5:11 € Dimensions in mm

SPEC VERSION LICENSE PAGE cfd05b053c736a4F15ba3030aa41febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.