. CC-DIN127-DS-M8 revA '?) CommunityCAD Size datasheet - M8
DIN 127 M8 split lock washer
Size datasheet: this size's values with their levels, conventions and sources.
For M8 bolts and screws Part key din127-b-m8 Files 1 STEP AP214 (simplified) MB, front view, 2.5:1 M8, view from above, 1.5:1 Sym. Dimension Value Level di Bore diameter 8.3 L1- 2 8.1-8.5 d2 Outside diameter (max) < 14.8 L1- 3 b Section width 3 L1- 3 2.85-3.15 s Section thickness 2 L1- 3 1.9-2.1 r Section corner radius 0.5c L1- 3 h Free height, form B 4.35 L1- 3 4-4.7
Modeled value: nominal, else the midpoint of min-max. s / =: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
DIN 127:1987 Page 1/2 Split lock washer, form B - M8 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec e79bc69c722a7450eb0be681b46a36c48d05506e
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
CC-DIN127-DS-M8 revA Size datasheet - M8
'?) CommunityCAD
Conventions
e Section and bore: A rectangle b wide (radial) and s thick (axial), its inner side on the d1 bore, constant around the turn. The outside is d1 + 2b, within d2 max.
« Section corners: r on the two outside - diameter corners; the bore- side corners are sharp. Interpreted from the standard's figure and real parts.
« Free shape and height: One right-hand turn of a helix at a constant lead, so the envelope runs from Z = 0 to the modeled h (form B).
« Split: A radial, parallel- sided slot centred on +X, as wide as s (the owner's rule).
« Values: d1 and h at their min/max midpoints; b, s and r at their nominals.
« Markings and finish: No markings. Material and finish are metadata only: one model per size.
Sources Source Publisher Retrieved sha256 fasten-it-din127 fasten.it 2026-10-25 1383f64491a7 fasteners-eu-din127 fasteners.eu 2026-10-25 alS56fba44d2d fasteners-eu-din127-a-section fasteners.eu 2026-10-25 b26cfd68a8tt globalfastener-din127 globalfastener.com (Internet Archive copy, captured 2026-04-21) 2026-10-25 068eb24235d1
globalfastener-din127-a-section globalfastener.com (Internet Archive copy, captured 2026-05-21) 2026-10-25 1643aQde3fca
The whole series (verification map, corrections, drawings): CC-DIN127-Ds.
DIN 127:1987 Page 2/2 Split lock washer, form B - M8 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec e79bc69c722a7450eb0be681b46a36c48d05506e
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.