ISO 4762 hexagon socket head cap screw, M8
Size drawing - M8 values on the views - | = 25 shown - enlarged 2:1
| = 25 shown lengths 12-80
dk = 12.865 12.73-13.00
d1 = 6.6468
View from above
N44
= 50° (ISO 4753 CH)
Thread pitch 1.25
12.865
Head diameter, plain 12.73-13.00
< Head diameter, knurled < 15.27
7.82 7.64-8.00
Head height
6.08 6.02-6.14
Socket across flats
2 6.863 Socket across corners
Socket depth
Wall under socket
Head top chamfer 8-8
O.5* 0.4-0.6
Underhead fillet radius
7.89 7.78-8.00
Shank diameter
< Transition diameter $ ot
> Bearing face diameter 2 12.35
Thread length AS Pe
Basic minor diameter (end face) 6.6468
Tap drill (method d - P) 6.75
End chamfer angle, deg
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L2 1- L119 - LO 2.
Notes
s: the nominal is the key size; the socket is modeled at the middle of its band.
'? CommunityCAD
TITLE
Size drawing, M8
STANDARDS FOLLOWED ISO 4762:2004 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread)
FAMILY / DETAIL Socket head cap screw - M8
SHEET
CC-1804762-SZ-M8
REV SCALE
A 21
PROJECTION UNITS
Dimensions in mm
SPEC VERSION
cfd05b053c736a4F15ba3030aa41Febd40cdc205
LICENSE
PAGE
CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
