ISO 4762 hexagon socket head cap screw, M8
Size drawing - M8 values on the views - | = 25 shown - enlarged 5:1
Source levels Sym. Dimensi Main value = the modeled value (nominal, else the
middle of min-max). Thread pitch 1.25 Grey under a value = its min-max, where the source gives both.
12.865 < / = = the source gives only that limit, modeled at it. Head diameter, plain ref = reference.
dk = 12.865 12.73-13.00 12.73-13.00 = 0. L2 = the standard itself (or its complete free preview,
$13.27 or the maker's drawing). L1 = two or more independent sources agree: the View from above Head height 7.82 eee oe only: pri . TGGBD = ly: printed amber and marked *. c = a source value was corrected; the datasheet says 6.08 how.
6.02-6.14 House convention = a detail no source dimensions,
Head diameter, knurled
Socket across flats
> 6.863 drawn to a stated house rule. Socket across corners This size's values: L2 1- L119 - LO 2. Notes s: the nominal is the key size; the socket is modeled at
Socket depth the middle of its band.
Wall under socket
Head top chamfer 8-8
O.5* 0.4-0.6
Underhead fillet radius
7.89 7.78-8.00
Shank diameter
< Transition diameter $ ot
> Bearing face diameter 2 12.35 | = 25 shown
lengths 12-80 28 ref Thread length
Basic minor diameter (end face) 6.6468
Tap drill (method d - P) 6.75
End chamfer angle, deg
< 50° (ISO 4753 CH)
TITLE
'? CommunityCAD Size drawing, M8
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4762:2004 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Socket head cap screw - M8 SHEET REV SCALE PROJECTION UNITS CC-1S804762-SZ-M8 A 5:11 € Dimensions in mm
SPEC VERSION LICENSE PAGE 54d2547caedeObédef71904216be1e6990995d2a CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.