ISO 7092 plain washer, small series, grade A, M8
Size drawing - M8 values on the views - enlarged 5:1
d2 = 15.00 14.57-15.00
Dimension
8.40 8.40-8.62
Hole diameter (nom = min)
15.00 14.57-15.00
Outside diameter (nom = max)
1.6 1.4-1.8
Thickness
d2 = 15.00 14.57-15.00
View from above
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 3.
Notes
d1 nom = d1 min and d2 nom = d2 max (the standard's own convention); h nom lies in its band.
Edges are sharp, walls square to the faces: house conventions, sheet DO2.
TITLE
'? CommunityCAD Size drawing, M8
‘STANDARDS FOLLOWED ISO 7092:2000
FAMILY / DETAIL
Plain washer, small series - M8
SHEET
CC-1S07092-SZ-M8
REV SCALE PROJECTION UNITS
A 5:1 Dimensions in mm
SPEC VERSION
LICENSE
e€79bc69C722a7450eb0be681b46a36c48d05506e CC-BY 4.0 IronPixel Labs LLC
PAGE
1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.