ISO 10511 nylon insert lock nut (thin, non-metallic insert), M8
Size drawing - M8 values on the views - enlarged 5:1
Sym. Dimensi
Thread pitch ra
12.865 12.73-13.00
Width across flats
2 Width across corners 2 14.38
> | Hexagon height 2 3.70
h = 6.47 Nut height (to the collar top) 6.47 6.18-6.76 6.18-6.76
m = 3.70 > Wrenching height B a
2 11.60
Bearing face diameter
8.375 8.00-8.75
Countersink diameter
22.5 15-30
Corner chamfer angle, deg
105 90-120
Countersink angle, deg
Basic minor diameter (crests) eal
tap Tap drill (method D - P) 6.78
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
s = 12.865 L2 = the standard itself (or its complete free preview, or the maker's drawing). 12.73-13.00 L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L2 11-L16.
Notes
s: modeled at the middle of its s min-max band (ADR 0014). m is modeled at m min.
e is not modeled on its own: the regular hexagon gives e = 2s/v3 from the modeled s, = e min.
dw min sets the corner chamfer's face circle, (dw min + s) / 2; mw min is checked at mid-flat. No washer face (ISO 10511 has none, so no c). Countersink on the bearing face only (ADR 0047).
| e = 14.38
View from above
TITLE
'? CommunityCAD Size drawing, M8
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 10511:2012 (withdrawn) - ISO 68-1 / ISO 261 (thread) Lock nut - M8
SHEET REV SCALE PROJECTION UNITS CC-1$010511-SZ-M8 A 5:11 € Dimensions in mm
SPEC VERSION LICENSE PAGE
82d0e3f1e4052a4ecS59d0F9Fd7b4cF7b5772671 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.