DIN 7984 low head socket cap screw, M8
Size drawing - M8 values on the views - | = 25 shown - enlarged 2:1
Source levels Sym. Dimensi Main value = the modeled value (nominal, else the
middle of min-max). Thread pitch 1.25 Grey under a value = its min-max, where the source gives both. , 12.865 < / = = the source gives only that limit, modeled at it. dk = 12.865 i Head diameter 12.73-13 ref = reference. L2 = the standard itself (or its complete free preview, Head height 4.91 or the maker's drawing). 4.82-5 L1 = two or more independent sources agree: the s=5.08 5.08 release gate. 5.02-5.14 Socket across flats 5.09-5.16 LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says 25.72 how. House convention = a detail no source dimensions,
Socket across corners
3.8 drawn to a stated house rule. Socket depth . This size's values: L2 1- L117 - LO 3. 3.65-3.95 Notes
| = 25 shown < 0.8% s: the nominal is the key size; the socket is modeled at lengths 16-100 Head top chamfer the middle of its band.
O.5* 0.4-0.6
Underhead fillet radius
= 50° (ISO 4753 CH) Shank diameter 7.89e
$9.2 Lo | Transition diameter
di = 6.6468
Bearing face diameter
Thread length
Basic minor diameter (end face) Tap drill (method d - P)
End chamfer angle, deg
TITLE
'? CommunityCAD Size drawing, M8
STANDARDS FOLLOWED FAMILY / DETAIL
DIN 7984:2022 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Low head cap screw - M8
SHEET REV SCALE PROJECTION UNITS CC-DIN7984-SZ-M8 A 2:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE 82d0e3f1e4052a4ec559d0F9Fd7b4cF7b5772671 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.